Bulk Fiber, 2 Strand Corning Glass, Bend Optimized, Multimode, 50/125 OM2, Distribution Cable, OFNR Riser Rated, Indoor Only, Tight Buffer, Orange Outer Jacket
This riser distribution fiber cable is composed of 2 colored tight buffers, aramid yarn, and a PVC outer jacket. All component materials meet the EU RoHS and REACH Directive standards.
The riser distribution fiber cable is available in 12 TIA standard colors or special order colors. The fiber cable is UL Listed OFNR for use in vertical runs in building riser shafts or from floor to floor. Standard surface print denotes construction, NEC rating, and fiber type, and includes footage markers. Custom print can also be accommodated.
- 900µm Tight Buffers.
- Aramid Yarn Strength Members.
- Durable OFNR Riser Jacket.
- Exclusive use of Corning® optical fibers.
- Jacket print ensures product identification and fiber compatibility.
- Buffers strip consistently between 3.5-5 lbs/ft, helpful for onsite termination.
- Durable jacket offers added protection during installation and in rugged use applications.
- General indoor applications.
- Trunk cable between floors.
- Data centers.
-40°C to +70°C
-20°C to +70°C
Outer Jacket Material
Flame Retardant PVC
Outer Jacket Color
Tight Buffer Material
Flame Retardant PVC
Tight Buffer Color
Available in 12 TIA/EIA Color Standards
Nominal Outer Diameter
Minimum Bend Radius, Installation
Minimum Bend Radius, Operation
Bandwidth (EMB) (High Performance)
850 MHz @ 850nm
Link Length (10GB/s)
Multimode Fiber Information
Multi-Mode cable commonly has a diameter in the 50-to-100 micron range (typical multimode fiber core diameters are 50 or 62.5 micrometers). Multimode fiber gives you high bandwidth at high speeds (10 to 100MBS - Gigabit to 275m to 2km) over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. However, in long cable runs (greater than 3000 feet [914.4 meters), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission so designers now call for single mode fiber in new applications using Gigabit and beyond.