Bulk Fiber, 8 Strand, Multimode, 62.5/125, OM1, Breakout Cable, OFNR Riser Rated, Indoor/Outdoor, Tight Buffer, Black Outer Jacket, 2.5mm Sub-Cables, Price Per Foot
This breakout riser fiber cable is ideal for installations requiring an extremely rugged and reliable fiber optic cable design where maximum mechanical and environmental protection are necessary. It's the easiest cable to install where direct termination of connectors to sub-units and direct run to panels and equipment is desired. Direct termination of the riser breakout fiber cable to each subcable provides additional strain relief for better connector retention during moves, adds, and changes. Breakout riser fiber cables utilize high performance components and construction and are UL Listed in accordance with NEC sections 770.179(b) for use in vertical runs in building riser shafts from floor to floor.
-50°C to +75°C
-55°C to +85°C
-30°C to +60°
UL Listed Type OFNR (UL 1666) and FT4 (CSA C22.2 No. 232)
11.6 mm (0.46 in)
126 kg/km (85 lbs/1,000ft)
Tensile Load - Installation
4000 N (900 lbs)
Tensile Load - Operational
1700 N (380 lbs)
Minimum Bend Radius - Installation
17.5 cm (6.9 in)
Minimum Bend Radius - Long Term
11.6 cm (4.6 in)
Installation loads in excess of 2,700 N (600 lbs) are not recommended. Note: 2.5mm subcables standard. 2.0mm and 2.9mm subcables available by request. Contact Fiber Savvy at 951-801-5780 for ordering details.
Multimode Fiber Information
Multi-Mode cable commonly has a diameter in the 50-to-100 micron range (typical multimode fiber core diameters are 50 or 62.5 micrometers). Multimode fiber gives you high bandwidth at high speeds (10 to 100MBS - Gigabit to 275m to 2km) over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. However, in long cable runs (greater than 3000 feet [914.4 meters), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission so designers now call for single mode fiber in new applications using Gigabit and beyond.