Bulk Fiber, 72 Strand, Multimode, 62.5/125 OM1, Distribution Cable, OFNR Riser Rated, Indoor/Outdoor, Tight Buffer, Black Outer Jacket, Price Per Foot
This riser distribution fiber cable is ideal for Indoor/outdoor applications. The tight-bound, tight-buffered design allows the fiber cables to be installed in intra-building backbone and inter-building campus locations without costly transitions between cable types. It's ideal for configurations requiring a single termination point with multiple fibers. The riser distribution fiber cable uses high performance components and construction and is UL Listed in accordance with NEC sections 770.179(b) for use in vertical runs in building riser shafts or from floor to floor.
Multimode Fiber Information
Multi-Mode cable commonly has a diameter in the 50-to-100 micron range (typical multimode fiber core diameters are 50 or 62.5 micrometers). Multimode fiber gives you high bandwidth at high speeds (10 to 100MBS - Gigabit to 275m to 2km) over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. However, in long cable runs (greater than 3000 feet [914.4 meters), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission so designers now call for single mode fiber in new applications using Gigabit and beyond.
-40°C to +85°C
-55°C to +85°C
-10°C to +60°
UL Listed Type OFNR (UL 1666) and FT4 (CSA C22.2 No. 232)
14.0 mm (0.55 in)
177 kg/km (119 lbs/1,000ft)
Tensile Load - Installation
5400 N (1200 lbs)
Tensile Load - Operational
1800 N (400 lbs)
Minimum Bend Radius - Installation
21.0 cm (8.3 in)
Minimum Bend Radius - Long Term
14.0 cm (5.5 in)
Installation loads in excess of 2,700 N (600 lbs) are not recommended. Contact Fiber Savvy at 951-801-5780 for ordering details.