Helping you get Wire from Point A to Point B - WIRE INSTALLATION TOOLS & SPECIALTY DRILL BITS

Tools & Accessories

Cable Fishing Rods

Replacement Flexible Leader for Wire Python

This is a replacement flexible leader for the Wire Python wire pulling and retrieval system. Use this leader with the magnet bullet (MAG-301) on the end and keep on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

5/16" Fibersnake Flexible Leader

The 5/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit.

Fibersnake Flexible Leader, for 1/4" and 3/16" Fibersnakes

The 1/4" & 3/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit. It also works well with corrugated conduit.

Pro Set 36 Kit

- 5/32" Glow, 1/4" Yellow & 3/16" Orange Rods
- All parts are interchangeable for a total of 36' in length
- Also includes Flex Fish magnet with all attachments
- Kit comes packaged in a handy clear carrying case with vinyl caps
- Made in the USA
- One Year Warranty on Manufacturers Defects

3" Mega-Magnetic Bit Holder 1/4" hex shank

The Mega-Magnetic bit holder is compatible to hold most common bits. The strong magnet helps keep all your bits intact during use keeping them from falling and getting misplaced. This item is portable and will fit nicely into a tool bag taking up only a minimal amount of space.

Cable Cart

- Heavy duty steel with durable powder-coated finish
- Vertical rack pulls out for easy loading / unloading of spools
- 3/4" axles accommodate a wide assortment of reel sizes
- Front stanchions come with both 3/4" and 1" axles to provide more versatility
- Add plywood and the Cable Cart becomes a mobile workbench
- Room for your ladder, toolbox and other supplies
- Durable locking casters are rated up to 1000 lbs
- Combine it with our Fiberfish Rodder and you have all the tools you need to pull wire through conduit
- Made in the USA
- One Year Warranty on Manufacturers Defects.

Cable Caddy, 43" x 16", 7" Wheels, Heavy Duty

The 43" x 16" Heavy Duty Cable Caddy can carry multiple spools of wire or cable on its 1/2" solid steel axles. This unit is portable with its 7" rubber wheels and has six axle positions for unlimited versatility. It carries spools up to 16" wide. The 43" x 16" Heavy Duty Cable Caddy carries over 250 pounds of wire or cable.

Cable Dolly, 8 Axle Heavy Duty Wire Cart Caddy with Wheels

The Cable Dolly has four 12" wide spindles and an eight axle system. It can carry multiple spools of wire or cable and durable locking casters for mobility. This cable dolly is made of heavy duty steel and has a powder coated finish.

Stud Mounted Cable Caddy

The Stud Cable/Wire Caddy is a portable cable and wire installation solution that will help facilitate your cable run. It hangs on an exposed stud and supports several spools of wire or cable at a time. This cable caddy is compact and portable. It is manufactured of heavy duty steel with a durable powder coat finish.

43" Portable Hand Truck, 7" Wheels

The 43" Portable Hand Truck is constructed with 1" steel tubing with a durable powder coat finish. It can accommodate spools up to 16" wide on its four solid steel 1/2" axles. It also has 7" rubber wheels for easy mobility.

Cable Carrier, Heavy Duty Portable Reel Holder

The Portable Heavy Duty Cable Reel Holder simplifies the installation of bulk wire and cable. Pull cable safely and conveniently from the sturdy, lightweight frame of this cable reel holder. Manufactured of heavy duty steel, this cable reel holder has a durable powder coated finish. The 26" wide crossbar will accommodate up to 250 pounds of cable on multiple spools.

Rack-A-Tiers - 2 Piece Rack System

The Rack-A-Tiers two piece work system is the ultimate heavy duty work shop system. It serves as a wire puller, sawhorse, vice, work bench, and stool. The Rack-A-Tiers is made of heavy duty plastic and nests together for convenient storage when not in use.

Replacement Leader Magnet for Wire Python

This is a replacement leader magnet for the Wire Python wire pulling and retrieval system. Use this leader magnet on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

Replacement Wire Python Paddle

This is a replacement paddle for the Wire Python wire pulling and retrieval system. Use this magnetic paddle on the outside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

Wire Bits, Feeler/Locator for Wall Cavities, 10 Pack

Feeler/Locator Wire Bits are used to identify specific wall cavities. It is ideal for mapping out speakers in a ceiling. These leave a tiny hole which is almost unnoticeable. Wire bits can be cut down to appropriate length.

Drywall Protector Plate, Single & Dual Gang

The Drywall Protector Plate temporarily locks on and protects the work hole and surrounding area from costly paint and drywall damage. It is compatible with both single and dual gang boxes. These handy drywall plates will save you hours of costly repair time.

Super High Intensity LED Headlight with Zoom Three-Way Switch

This Super High Intensity LED Headlight has a three way (high, low, flash) switch and adjustable head strap. The hinged mount allows you to adjust the LED to aim it as necessary. It is made of durable ABS and aluminum, and runs on three AA batteries.

Flexible Folding Shaft Drill Bit Steering Guide Tool

The Flexible Shaft Drill Bit Steering Guide Tool provides added control over drill bits. It folds for easy storage and portability.

5/16" Fibersnake Bullnose Replacement Tip, Brass

The 5/16" Fibersnake Bullnose Replacement Brass Tip fits the 5/16" Fibersnake Rodder.

1/4" & 3/16" Fibersnake Swivel Coupling, Joiner Section

The 1/4" & 3/16™ Fibersnake Swivel Coupling, Joiner Section is used to connect multiple Fibersnake Rodders.

5/16" Fibersnake Swivel Coupling, Joiner Section

The 5/16" Fibersnake Swivel Coupling, Joiner Section is used to connect multiple 5/16" Fibersnake Rodders.

5/16" Fibersnake Roller Guide

The 5/16" Fibersnake Roller Guide is used to navigate 90 degree bends and small gaps in conduit utilizing the FIbersnake Rodder. This works excellent in corrugated conduit.

10' or 25' Undercarpet Snake (In PVC Case), Flat Annealed Stainless Steel

The Undercarpet Snake is made of annealed stainless steel and is used to run wire underneath carpet. It easily stores in a convenient PVC case and can be pulled from either direction.

10' or 25' Fish Wire, Carbon Steel, PVC Case

The 10' Fish Wire is an economical and convenient solution for short distance wire pulling. It is made of carbon steel fish wire and stores in a convenient PVC case. It can be pulled from either direction.

Replacement Z-Tip For Telescoping Poles - Z Hook

This Z-Tip for telescoping poles helps pull wires over long distances in hard to reach places. It allows installers to run wire and cable from a safe distance around suspended ceilings, crawl spaces, and attics. This tools works great in factories and warehouses with high ceilings.

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Fish Hook

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, Bullnose Tip, Ball Chain, Screw Tip, and Pull Ring for BES wire fishing rods.

10" Ball Chain for Wire Fishing Tools

Use the 10 foot chain to fish wires in uninsulated walls. This is quite the versatile and easy to use tool paired with a Fish Hook or BES wire fishing tool.

1/4" Fiberfish Replacement Tip, Screw Tip

The 1/4" Fiberfish Replacement Head Screw Tip fits our wire fishing rods from BES like the Fiberfish. It has a screw style machined steel tip.

3/16" & 5/32" Fiberfish/Glowfish Rods Starter Attachment Kit

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, and replacement Bullnose Tips for BES wire fishing rods.

Fiberfish/Glowfish Replacement Tip, LED Light

The LED Light Fiberfish Replacement Tip fits all wire fishing rods from BES. This replacement tip is outfitted with a high intensity LED light making it easier to work with in dark attics, basements, and crawl spaces.

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Pull Ring

This Pull Ring Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish and Glowfish. It has a pull ring style machined steel tip.

Professional Level and Template

This Professional Level and Template help the installers to mark precise holes in paneling and drywall. It will work with single or two gang boxes.

Flex Magnet Light

This push button on/off High Intensity White LED tip includes a power full 5 pound magnet and a 23" Flexible shaft that is capable of bending into any position desired.

5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

This 5/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

The 5/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 400 feet to up to 1,000 feet. With its non-conductive coating, the Fibersnake Rodder is safe for working around electrical wiring and inside of conduit. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 200'-600' Length

The 1/4" Fibersnake Rod for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 200 feet to up to 600 feet and has a 1/4" diameter. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 100'-600' Length

The 1/4" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 100 feet to up to 600 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 10'-300' Length

This 3/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 50'-300' Length

The 3/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 50 feet to up to 300 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4” Home Pro Line, Wire Fishing Rod Kit – 4’ (12’ Total)

The Home Pro Line Wire Fishing Rod Kit includes 12 total feet of heavy duty rods for tough pulls. They are built to last, with zinc plating and rustproofing. The ends are made of machined steel. These wire fishing rods are stiff enough for drop ceilings and flexible enough for working with insulated walls.

3/16" Fiberfish II Wire Fishing Rod, 6' Length, Bullnose Ends

The versatile, non-conductive Fiberfish II is perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Wire Fishing Rod Kit, 6' Rods (30' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Wire Fishing Rod Kit, 3' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. Kit comes packaged in a handy, clear carrying case with vinyl caps.

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Kit, Plastic Coated Rods - 6' (30' Total Length)

The most versatile of the Fiberfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. Fiberfish rods have a durable plastic coating that offers great performance with out the risk of splintering or slivering of the fiberglass.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Male/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod - 6' Bullnose/Bullnose

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. The Glowfish luminous installation rod is durable with zinc plating and rustproof, with machined steel end fittings. It is flexible enough for working inside insulated walls yet stiff enough.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Bullnose/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

1/4" Fiberfish Wire Fishing Rod Kit, 3' Male/Female, Female/Female, Bullnose Tips (6' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

24" Flex-Fish Flexible Wire Fishing Tool

Use the magnetic retriever to fish wires in uninsulated walls. One end has a permanently attached magnet, the other end has a female fitting which will accept the magnet head, Pull Ring, Fish Hook, Screw Tip, Ball Chain, Wisp Head, and Directional Tool attachments.

3/16" Fiberfish "FourPack" Wire Fishing Rods, 3" (12" Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. This kit comes packaged in a handy vinyl pouch.

1/4" Fiberfish Wire Fishing Rod Cable Tray Kit, 6" (48" Total)

The most versatile of the Fiberfish with the new plastic coating process. These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

1/4" Fiberfish Wire Fishing Rod Kit, 6' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

Have Questions about BES or would like to place an order?

If you have further questions about any BES products or would like to place and order with us please leave us a message using the form below. Someone from our team will respond to your message as soon as possible. We look forward to fulfilling your requests.

Helping you get Wire from Point A to Point B - WIRE INSTALLATION TOOLS & SPECIALTY DRILL BITS

Tools & Accessories

Cable Fishing Rods

Replacement Flexible Leader for Wire Python

This is a replacement flexible leader for the Wire Python wire pulling and retrieval system. Use this leader with the magnet bullet (MAG-301) on the end and keep on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

5/16" Fibersnake Flexible Leader

The 5/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit.

Fibersnake Flexible Leader, for 1/4" and 3/16" Fibersnakes

The 1/4" & 3/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit. It also works well with corrugated conduit.

Pro Set 36 Kit

- 5/32" Glow, 1/4" Yellow & 3/16" Orange Rods
- All parts are interchangeable for a total of 36' in length
- Also includes Flex Fish magnet with all attachments
- Kit comes packaged in a handy clear carrying case with vinyl caps
- Made in the USA
- One Year Warranty on Manufacturers Defects

3" Mega-Magnetic Bit Holder 1/4" hex shank

The Mega-Magnetic bit holder is compatible to hold most common bits. The strong magnet helps keep all your bits intact during use keeping them from falling and getting misplaced. This item is portable and will fit nicely into a tool bag taking up only a minimal amount of space.

Cable Cart

- Heavy duty steel with durable powder-coated finish
- Vertical rack pulls out for easy loading / unloading of spools
- 3/4" axles accommodate a wide assortment of reel sizes
- Front stanchions come with both 3/4" and 1" axles to provide more versatility
- Add plywood and the Cable Cart becomes a mobile workbench
- Room for your ladder, toolbox and other supplies
- Durable locking casters are rated up to 1000 lbs
- Combine it with our Fiberfish Rodder and you have all the tools you need to pull wire through conduit
- Made in the USA
- One Year Warranty on Manufacturers Defects.

Cable Caddy, 43" x 16", 7" Wheels, Heavy Duty

The 43" x 16" Heavy Duty Cable Caddy can carry multiple spools of wire or cable on its 1/2" solid steel axles. This unit is portable with its 7" rubber wheels and has six axle positions for unlimited versatility. It carries spools up to 16" wide. The 43" x 16" Heavy Duty Cable Caddy carries over 250 pounds of wire or cable.

Cable Dolly, 8 Axle Heavy Duty Wire Cart Caddy with Wheels

The Cable Dolly has four 12" wide spindles and an eight axle system. It can carry multiple spools of wire or cable and durable locking casters for mobility. This cable dolly is made of heavy duty steel and has a powder coated finish.

Stud Mounted Cable Caddy

The Stud Cable/Wire Caddy is a portable cable and wire installation solution that will help facilitate your cable run. It hangs on an exposed stud and supports several spools of wire or cable at a time. This cable caddy is compact and portable. It is manufactured of heavy duty steel with a durable powder coat finish.

43" Portable Hand Truck, 7" Wheels

The 43" Portable Hand Truck is constructed with 1" steel tubing with a durable powder coat finish. It can accommodate spools up to 16" wide on its four solid steel 1/2" axles. It also has 7" rubber wheels for easy mobility.

Cable Carrier, Heavy Duty Portable Reel Holder

The Portable Heavy Duty Cable Reel Holder simplifies the installation of bulk wire and cable. Pull cable safely and conveniently from the sturdy, lightweight frame of this cable reel holder. Manufactured of heavy duty steel, this cable reel holder has a durable powder coated finish. The 26" wide crossbar will accommodate up to 250 pounds of cable on multiple spools.

Rack-A-Tiers - 2 Piece Rack System

The Rack-A-Tiers two piece work system is the ultimate heavy duty work shop system. It serves as a wire puller, sawhorse, vice, work bench, and stool. The Rack-A-Tiers is made of heavy duty plastic and nests together for convenient storage when not in use.

Replacement Leader Magnet for Wire Python

This is a replacement leader magnet for the Wire Python wire pulling and retrieval system. Use this leader magnet on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

Replacement Wire Python Paddle

This is a replacement paddle for the Wire Python wire pulling and retrieval system. Use this magnetic paddle on the outside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

Wire Bits, Feeler/Locator for Wall Cavities, 10 Pack

Feeler/Locator Wire Bits are used to identify specific wall cavities. It is ideal for mapping out speakers in a ceiling. These leave a tiny hole which is almost unnoticeable. Wire bits can be cut down to appropriate length.

Drywall Protector Plate, Single & Dual Gang

The Drywall Protector Plate temporarily locks on and protects the work hole and surrounding area from costly paint and drywall damage. It is compatible with both single and dual gang boxes. These handy drywall plates will save you hours of costly repair time.

Super High Intensity LED Headlight with Zoom Three-Way Switch

This Super High Intensity LED Headlight has a three way (high, low, flash) switch and adjustable head strap. The hinged mount allows you to adjust the LED to aim it as necessary. It is made of durable ABS and aluminum, and runs on three AA batteries.

Flexible Folding Shaft Drill Bit Steering Guide Tool

The Flexible Shaft Drill Bit Steering Guide Tool provides added control over drill bits. It folds for easy storage and portability.

5/16" Fibersnake Bullnose Replacement Tip, Brass

The 5/16" Fibersnake Bullnose Replacement Brass Tip fits the 5/16" Fibersnake Rodder.

1/4" & 3/16" Fibersnake Swivel Coupling, Joiner Section

The 1/4" & 3/16™ Fibersnake Swivel Coupling, Joiner Section is used to connect multiple Fibersnake Rodders.

5/16" Fibersnake Swivel Coupling, Joiner Section

The 5/16" Fibersnake Swivel Coupling, Joiner Section is used to connect multiple 5/16" Fibersnake Rodders.

5/16" Fibersnake Roller Guide

The 5/16" Fibersnake Roller Guide is used to navigate 90 degree bends and small gaps in conduit utilizing the FIbersnake Rodder. This works excellent in corrugated conduit.

10' or 25' Undercarpet Snake (In PVC Case), Flat Annealed Stainless Steel

The Undercarpet Snake is made of annealed stainless steel and is used to run wire underneath carpet. It easily stores in a convenient PVC case and can be pulled from either direction.

10' or 25' Fish Wire, Carbon Steel, PVC Case

The 10' Fish Wire is an economical and convenient solution for short distance wire pulling. It is made of carbon steel fish wire and stores in a convenient PVC case. It can be pulled from either direction.

Replacement Z-Tip For Telescoping Poles - Z Hook

This Z-Tip for telescoping poles helps pull wires over long distances in hard to reach places. It allows installers to run wire and cable from a safe distance around suspended ceilings, crawl spaces, and attics. This tools works great in factories and warehouses with high ceilings.

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Fish Hook

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, Bullnose Tip, Ball Chain, Screw Tip, and Pull Ring for BES wire fishing rods.

10" Ball Chain for Wire Fishing Tools

Use the 10 foot chain to fish wires in uninsulated walls. This is quite the versatile and easy to use tool paired with a Fish Hook or BES wire fishing tool.

1/4" Fiberfish Replacement Tip, Screw Tip

The 1/4" Fiberfish Replacement Head Screw Tip fits our wire fishing rods from BES like the Fiberfish. It has a screw style machined steel tip.

3/16" & 5/32" Fiberfish/Glowfish Rods Starter Attachment Kit

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, and replacement Bullnose Tips for BES wire fishing rods.

Fiberfish/Glowfish Replacement Tip, LED Light

The LED Light Fiberfish Replacement Tip fits all wire fishing rods from BES. This replacement tip is outfitted with a high intensity LED light making it easier to work with in dark attics, basements, and crawl spaces.

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Pull Ring

This Pull Ring Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish and Glowfish. It has a pull ring style machined steel tip.

Professional Level and Template

This Professional Level and Template help the installers to mark precise holes in paneling and drywall. It will work with single or two gang boxes.

Flex Magnet Light

This push button on/off High Intensity White LED tip includes a power full 5 pound magnet and a 23" Flexible shaft that is capable of bending into any position desired.

5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

This 5/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

The 5/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 400 feet to up to 1,000 feet. With its non-conductive coating, the Fibersnake Rodder is safe for working around electrical wiring and inside of conduit. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 200'-600' Length

The 1/4" Fibersnake Rod for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 200 feet to up to 600 feet and has a 1/4" diameter. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 100'-600' Length

The 1/4" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 100 feet to up to 600 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 10'-300' Length

This 3/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 50'-300' Length

The 3/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 50 feet to up to 300 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4” Home Pro Line, Wire Fishing Rod Kit – 4’ (12’ Total)

The Home Pro Line Wire Fishing Rod Kit includes 12 total feet of heavy duty rods for tough pulls. They are built to last, with zinc plating and rustproofing. The ends are made of machined steel. These wire fishing rods are stiff enough for drop ceilings and flexible enough for working with insulated walls.

3/16" Fiberfish II Wire Fishing Rod, 6' Length, Bullnose Ends

The versatile, non-conductive Fiberfish II is perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Wire Fishing Rod Kit, 6' Rods (30' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Wire Fishing Rod Kit, 3' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. Kit comes packaged in a handy, clear carrying case with vinyl caps.

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Kit, Plastic Coated Rods - 6' (30' Total Length)

The most versatile of the Fiberfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. Fiberfish rods have a durable plastic coating that offers great performance with out the risk of splintering or slivering of the fiberglass.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Male/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod - 6' Bullnose/Bullnose

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. The Glowfish luminous installation rod is durable with zinc plating and rustproof, with machined steel end fittings. It is flexible enough for working inside insulated walls yet stiff enough.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Bullnose/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

1/4" Fiberfish Wire Fishing Rod Kit, 3' Male/Female, Female/Female, Bullnose Tips (6' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

24" Flex-Fish Flexible Wire Fishing Tool

Use the magnetic retriever to fish wires in uninsulated walls. One end has a permanently attached magnet, the other end has a female fitting which will accept the magnet head, Pull Ring, Fish Hook, Screw Tip, Ball Chain, Wisp Head, and Directional Tool attachments.

3/16" Fiberfish "FourPack" Wire Fishing Rods, 3" (12" Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. This kit comes packaged in a handy vinyl pouch.

1/4" Fiberfish Wire Fishing Rod Cable Tray Kit, 6" (48" Total)

The most versatile of the Fiberfish with the new plastic coating process. These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

1/4" Fiberfish Wire Fishing Rod Kit, 6' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

Have Questions about BES or would like to place an order?

If you have further questions about any BES products or would like to place and order with us please leave us a message using the form below. Someone from our team will respond to your message as soon as possible. We look forward to fulfilling your requests.

Helping you get Wire from Point A to Point B - WIRE INSTALLATION TOOLS & SPECIALTY DRILL BITS

Tools & Accessories

Cable Fishing Rods

Replacement Flexible Leader for Wire Python

This is a replacement flexible leader for the Wire Python wire pulling and retrieval system. Use this leader with the magnet bullet (MAG-301) on the end and keep on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

5/16" Fibersnake Flexible Leader

The 5/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit.

Fibersnake Flexible Leader, for 1/4" and 3/16" Fibersnakes

The 1/4" & 3/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit. It also works well with corrugated conduit.

Pro Set 36 Kit

- 5/32" Glow, 1/4" Yellow & 3/16" Orange Rods
- All parts are interchangeable for a total of 36' in length
- Also includes Flex Fish magnet with all attachments
- Kit comes packaged in a handy clear carrying case with vinyl caps
- Made in the USA
- One Year Warranty on Manufacturers Defects

3" Mega-Magnetic Bit Holder 1/4" hex shank

The Mega-Magnetic bit holder is compatible to hold most common bits. The strong magnet helps keep all your bits intact during use keeping them from falling and getting misplaced. This item is portable and will fit nicely into a tool bag taking up only a minimal amount of space.

Cable Cart

- Heavy duty steel with durable powder-coated finish
- Vertical rack pulls out for easy loading / unloading of spools
- 3/4" axles accommodate a wide assortment of reel sizes
- Front stanchions come with both 3/4" and 1" axles to provide more versatility
- Add plywood and the Cable Cart becomes a mobile workbench
- Room for your ladder, toolbox and other supplies
- Durable locking casters are rated up to 1000 lbs
- Combine it with our Fiberfish Rodder and you have all the tools you need to pull wire through conduit
- Made in the USA
- One Year Warranty on Manufacturers Defects.

Cable Caddy, 43" x 16", 7" Wheels, Heavy Duty

The 43" x 16" Heavy Duty Cable Caddy can carry multiple spools of wire or cable on its 1/2" solid steel axles. This unit is portable with its 7" rubber wheels and has six axle positions for unlimited versatility. It carries spools up to 16" wide. The 43" x 16" Heavy Duty Cable Caddy carries over 250 pounds of wire or cable.

Cable Dolly, 8 Axle Heavy Duty Wire Cart Caddy with Wheels

The Cable Dolly has four 12" wide spindles and an eight axle system. It can carry multiple spools of wire or cable and durable locking casters for mobility. This cable dolly is made of heavy duty steel and has a powder coated finish.

Stud Mounted Cable Caddy

The Stud Cable/Wire Caddy is a portable cable and wire installation solution that will help facilitate your cable run. It hangs on an exposed stud and supports several spools of wire or cable at a time. This cable caddy is compact and portable. It is manufactured of heavy duty steel with a durable powder coat finish.

43" Portable Hand Truck, 7" Wheels

The 43" Portable Hand Truck is constructed with 1" steel tubing with a durable powder coat finish. It can accommodate spools up to 16" wide on its four solid steel 1/2" axles. It also has 7" rubber wheels for easy mobility.

Cable Carrier, Heavy Duty Portable Reel Holder

The Portable Heavy Duty Cable Reel Holder simplifies the installation of bulk wire and cable. Pull cable safely and conveniently from the sturdy, lightweight frame of this cable reel holder. Manufactured of heavy duty steel, this cable reel holder has a durable powder coated finish. The 26" wide crossbar will accommodate up to 250 pounds of cable on multiple spools.

Rack-A-Tiers - 2 Piece Rack System

The Rack-A-Tiers two piece work system is the ultimate heavy duty work shop system. It serves as a wire puller, sawhorse, vice, work bench, and stool. The Rack-A-Tiers is made of heavy duty plastic and nests together for convenient storage when not in use.

Replacement Leader Magnet for Wire Python

This is a replacement leader magnet for the Wire Python wire pulling and retrieval system. Use this leader magnet on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

Replacement Wire Python Paddle

This is a replacement paddle for the Wire Python wire pulling and retrieval system. Use this magnetic paddle on the outside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

Wire Bits, Feeler/Locator for Wall Cavities, 10 Pack

Feeler/Locator Wire Bits are used to identify specific wall cavities. It is ideal for mapping out speakers in a ceiling. These leave a tiny hole which is almost unnoticeable. Wire bits can be cut down to appropriate length.

Drywall Protector Plate, Single & Dual Gang

The Drywall Protector Plate temporarily locks on and protects the work hole and surrounding area from costly paint and drywall damage. It is compatible with both single and dual gang boxes. These handy drywall plates will save you hours of costly repair time.

Super High Intensity LED Headlight with Zoom Three-Way Switch

This Super High Intensity LED Headlight has a three way (high, low, flash) switch and adjustable head strap. The hinged mount allows you to adjust the LED to aim it as necessary. It is made of durable ABS and aluminum, and runs on three AA batteries.

Flexible Folding Shaft Drill Bit Steering Guide Tool

The Flexible Shaft Drill Bit Steering Guide Tool provides added control over drill bits. It folds for easy storage and portability.

5/16" Fibersnake Bullnose Replacement Tip, Brass

The 5/16" Fibersnake Bullnose Replacement Brass Tip fits the 5/16" Fibersnake Rodder.

1/4" & 3/16" Fibersnake Swivel Coupling, Joiner Section

The 1/4" & 3/16™ Fibersnake Swivel Coupling, Joiner Section is used to connect multiple Fibersnake Rodders.

5/16" Fibersnake Swivel Coupling, Joiner Section

The 5/16" Fibersnake Swivel Coupling, Joiner Section is used to connect multiple 5/16" Fibersnake Rodders.

5/16" Fibersnake Roller Guide

The 5/16" Fibersnake Roller Guide is used to navigate 90 degree bends and small gaps in conduit utilizing the FIbersnake Rodder. This works excellent in corrugated conduit.

10' or 25' Undercarpet Snake (In PVC Case), Flat Annealed Stainless Steel

The Undercarpet Snake is made of annealed stainless steel and is used to run wire underneath carpet. It easily stores in a convenient PVC case and can be pulled from either direction.

10' or 25' Fish Wire, Carbon Steel, PVC Case

The 10' Fish Wire is an economical and convenient solution for short distance wire pulling. It is made of carbon steel fish wire and stores in a convenient PVC case. It can be pulled from either direction.

Replacement Z-Tip For Telescoping Poles - Z Hook

This Z-Tip for telescoping poles helps pull wires over long distances in hard to reach places. It allows installers to run wire and cable from a safe distance around suspended ceilings, crawl spaces, and attics. This tools works great in factories and warehouses with high ceilings.

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Fish Hook

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, Bullnose Tip, Ball Chain, Screw Tip, and Pull Ring for BES wire fishing rods.

10" Ball Chain for Wire Fishing Tools

Use the 10 foot chain to fish wires in uninsulated walls. This is quite the versatile and easy to use tool paired with a Fish Hook or BES wire fishing tool.

1/4" Fiberfish Replacement Tip, Screw Tip

The 1/4" Fiberfish Replacement Head Screw Tip fits our wire fishing rods from BES like the Fiberfish. It has a screw style machined steel tip.

3/16" & 5/32" Fiberfish/Glowfish Rods Starter Attachment Kit

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, and replacement Bullnose Tips for BES wire fishing rods.

Fiberfish/Glowfish Replacement Tip, LED Light

The LED Light Fiberfish Replacement Tip fits all wire fishing rods from BES. This replacement tip is outfitted with a high intensity LED light making it easier to work with in dark attics, basements, and crawl spaces.

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Pull Ring

This Pull Ring Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish and Glowfish. It has a pull ring style machined steel tip.

Professional Level and Template

This Professional Level and Template help the installers to mark precise holes in paneling and drywall. It will work with single or two gang boxes.

Flex Magnet Light

This push button on/off High Intensity White LED tip includes a power full 5 pound magnet and a 23" Flexible shaft that is capable of bending into any position desired.

5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

This 5/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

The 5/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 400 feet to up to 1,000 feet. With its non-conductive coating, the Fibersnake Rodder is safe for working around electrical wiring and inside of conduit. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 200'-600' Length

The 1/4" Fibersnake Rod for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 200 feet to up to 600 feet and has a 1/4" diameter. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 100'-600' Length

The 1/4" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 100 feet to up to 600 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 10'-300' Length

This 3/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 50'-300' Length

The 3/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 50 feet to up to 300 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4” Home Pro Line, Wire Fishing Rod Kit – 4’ (12’ Total)

The Home Pro Line Wire Fishing Rod Kit includes 12 total feet of heavy duty rods for tough pulls. They are built to last, with zinc plating and rustproofing. The ends are made of machined steel. These wire fishing rods are stiff enough for drop ceilings and flexible enough for working with insulated walls.

3/16" Fiberfish II Wire Fishing Rod, 6' Length, Bullnose Ends

The versatile, non-conductive Fiberfish II is perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Wire Fishing Rod Kit, 6' Rods (30' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Wire Fishing Rod Kit, 3' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. Kit comes packaged in a handy, clear carrying case with vinyl caps.

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Kit, Plastic Coated Rods - 6' (30' Total Length)

The most versatile of the Fiberfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. Fiberfish rods have a durable plastic coating that offers great performance with out the risk of splintering or slivering of the fiberglass.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Male/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod - 6' Bullnose/Bullnose

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. The Glowfish luminous installation rod is durable with zinc plating and rustproof, with machined steel end fittings. It is flexible enough for working inside insulated walls yet stiff enough.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Bullnose/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

1/4" Fiberfish Wire Fishing Rod Kit, 3' Male/Female, Female/Female, Bullnose Tips (6' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

24" Flex-Fish Flexible Wire Fishing Tool

Use the magnetic retriever to fish wires in uninsulated walls. One end has a permanently attached magnet, the other end has a female fitting which will accept the magnet head, Pull Ring, Fish Hook, Screw Tip, Ball Chain, Wisp Head, and Directional Tool attachments.

3/16" Fiberfish "FourPack" Wire Fishing Rods, 3" (12" Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. This kit comes packaged in a handy vinyl pouch.

1/4" Fiberfish Wire Fishing Rod Cable Tray Kit, 6" (48" Total)

The most versatile of the Fiberfish with the new plastic coating process. These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

1/4" Fiberfish Wire Fishing Rod Kit, 6' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

Have Questions about BES or would like to place an order?

If you have further questions about any BES products or would like to place and order with us please leave us a message using the form below. Someone from our team will respond to your message as soon as possible. We look forward to fulfilling your requests.

Helping you get Wire from Point A to Point B - WIRE INSTALLATION TOOLS & SPECIALTY DRILL BITS

Tools & Accessories

Cable Fishing Rods

Replacement Flexible Leader for Wire Python

This is a replacement flexible leader for the Wire Python wire pulling and retrieval system. Use this leader with the magnet bullet (MAG-301) on the end and keep on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

5/16" Fibersnake Flexible Leader

The 5/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit.

Fibersnake Flexible Leader, for 1/4" and 3/16" Fibersnakes

The 1/4" & 3/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit. It also works well with corrugated conduit.

Pro Set 36 Kit

- 5/32" Glow, 1/4" Yellow & 3/16" Orange Rods
- All parts are interchangeable for a total of 36' in length
- Also includes Flex Fish magnet with all attachments
- Kit comes packaged in a handy clear carrying case with vinyl caps
- Made in the USA
- One Year Warranty on Manufacturers Defects

3" Mega-Magnetic Bit Holder 1/4" hex shank

The Mega-Magnetic bit holder is compatible to hold most common bits. The strong magnet helps keep all your bits intact during use keeping them from falling and getting misplaced. This item is portable and will fit nicely into a tool bag taking up only a minimal amount of space.

Cable Cart

- Heavy duty steel with durable powder-coated finish
- Vertical rack pulls out for easy loading / unloading of spools
- 3/4" axles accommodate a wide assortment of reel sizes
- Front stanchions come with both 3/4" and 1" axles to provide more versatility
- Add plywood and the Cable Cart becomes a mobile workbench
- Room for your ladder, toolbox and other supplies
- Durable locking casters are rated up to 1000 lbs
- Combine it with our Fiberfish Rodder and you have all the tools you need to pull wire through conduit
- Made in the USA
- One Year Warranty on Manufacturers Defects.

Cable Caddy, 43" x 16", 7" Wheels, Heavy Duty

The 43" x 16" Heavy Duty Cable Caddy can carry multiple spools of wire or cable on its 1/2" solid steel axles. This unit is portable with its 7" rubber wheels and has six axle positions for unlimited versatility. It carries spools up to 16" wide. The 43" x 16" Heavy Duty Cable Caddy carries over 250 pounds of wire or cable.

Cable Dolly, 8 Axle Heavy Duty Wire Cart Caddy with Wheels

The Cable Dolly has four 12" wide spindles and an eight axle system. It can carry multiple spools of wire or cable and durable locking casters for mobility. This cable dolly is made of heavy duty steel and has a powder coated finish.

Stud Mounted Cable Caddy

The Stud Cable/Wire Caddy is a portable cable and wire installation solution that will help facilitate your cable run. It hangs on an exposed stud and supports several spools of wire or cable at a time. This cable caddy is compact and portable. It is manufactured of heavy duty steel with a durable powder coat finish.

43" Portable Hand Truck, 7" Wheels

The 43" Portable Hand Truck is constructed with 1" steel tubing with a durable powder coat finish. It can accommodate spools up to 16" wide on its four solid steel 1/2" axles. It also has 7" rubber wheels for easy mobility.

Cable Carrier, Heavy Duty Portable Reel Holder

The Portable Heavy Duty Cable Reel Holder simplifies the installation of bulk wire and cable. Pull cable safely and conveniently from the sturdy, lightweight frame of this cable reel holder. Manufactured of heavy duty steel, this cable reel holder has a durable powder coated finish. The 26" wide crossbar will accommodate up to 250 pounds of cable on multiple spools.

Rack-A-Tiers - 2 Piece Rack System

The Rack-A-Tiers two piece work system is the ultimate heavy duty work shop system. It serves as a wire puller, sawhorse, vice, work bench, and stool. The Rack-A-Tiers is made of heavy duty plastic and nests together for convenient storage when not in use.

Replacement Leader Magnet for Wire Python

This is a replacement leader magnet for the Wire Python wire pulling and retrieval system. Use this leader magnet on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

Replacement Wire Python Paddle

This is a replacement paddle for the Wire Python wire pulling and retrieval system. Use this magnetic paddle on the outside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

Wire Bits, Feeler/Locator for Wall Cavities, 10 Pack

Feeler/Locator Wire Bits are used to identify specific wall cavities. It is ideal for mapping out speakers in a ceiling. These leave a tiny hole which is almost unnoticeable. Wire bits can be cut down to appropriate length.

Drywall Protector Plate, Single & Dual Gang

The Drywall Protector Plate temporarily locks on and protects the work hole and surrounding area from costly paint and drywall damage. It is compatible with both single and dual gang boxes. These handy drywall plates will save you hours of costly repair time.

Super High Intensity LED Headlight with Zoom Three-Way Switch

This Super High Intensity LED Headlight has a three way (high, low, flash) switch and adjustable head strap. The hinged mount allows you to adjust the LED to aim it as necessary. It is made of durable ABS and aluminum, and runs on three AA batteries.

Flexible Folding Shaft Drill Bit Steering Guide Tool

The Flexible Shaft Drill Bit Steering Guide Tool provides added control over drill bits. It folds for easy storage and portability.

5/16" Fibersnake Bullnose Replacement Tip, Brass

The 5/16" Fibersnake Bullnose Replacement Brass Tip fits the 5/16" Fibersnake Rodder.

1/4" & 3/16" Fibersnake Swivel Coupling, Joiner Section

The 1/4" & 3/16™ Fibersnake Swivel Coupling, Joiner Section is used to connect multiple Fibersnake Rodders.

5/16" Fibersnake Swivel Coupling, Joiner Section

The 5/16" Fibersnake Swivel Coupling, Joiner Section is used to connect multiple 5/16" Fibersnake Rodders.

5/16" Fibersnake Roller Guide

The 5/16" Fibersnake Roller Guide is used to navigate 90 degree bends and small gaps in conduit utilizing the FIbersnake Rodder. This works excellent in corrugated conduit.

10' or 25' Undercarpet Snake (In PVC Case), Flat Annealed Stainless Steel

The Undercarpet Snake is made of annealed stainless steel and is used to run wire underneath carpet. It easily stores in a convenient PVC case and can be pulled from either direction.

10' or 25' Fish Wire, Carbon Steel, PVC Case

The 10' Fish Wire is an economical and convenient solution for short distance wire pulling. It is made of carbon steel fish wire and stores in a convenient PVC case. It can be pulled from either direction.

Replacement Z-Tip For Telescoping Poles - Z Hook

This Z-Tip for telescoping poles helps pull wires over long distances in hard to reach places. It allows installers to run wire and cable from a safe distance around suspended ceilings, crawl spaces, and attics. This tools works great in factories and warehouses with high ceilings.

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Fish Hook

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, Bullnose Tip, Ball Chain, Screw Tip, and Pull Ring for BES wire fishing rods.

10" Ball Chain for Wire Fishing Tools

Use the 10 foot chain to fish wires in uninsulated walls. This is quite the versatile and easy to use tool paired with a Fish Hook or BES wire fishing tool.

1/4" Fiberfish Replacement Tip, Screw Tip

The 1/4" Fiberfish Replacement Head Screw Tip fits our wire fishing rods from BES like the Fiberfish. It has a screw style machined steel tip.

3/16" & 5/32" Fiberfish/Glowfish Rods Starter Attachment Kit

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, and replacement Bullnose Tips for BES wire fishing rods.

Fiberfish/Glowfish Replacement Tip, LED Light

The LED Light Fiberfish Replacement Tip fits all wire fishing rods from BES. This replacement tip is outfitted with a high intensity LED light making it easier to work with in dark attics, basements, and crawl spaces.

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Pull Ring

This Pull Ring Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish and Glowfish. It has a pull ring style machined steel tip.

Professional Level and Template

This Professional Level and Template help the installers to mark precise holes in paneling and drywall. It will work with single or two gang boxes.

Flex Magnet Light

This push button on/off High Intensity White LED tip includes a power full 5 pound magnet and a 23" Flexible shaft that is capable of bending into any position desired.

5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

This 5/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

The 5/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 400 feet to up to 1,000 feet. With its non-conductive coating, the Fibersnake Rodder is safe for working around electrical wiring and inside of conduit. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 200'-600' Length

The 1/4" Fibersnake Rod for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 200 feet to up to 600 feet and has a 1/4" diameter. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 100'-600' Length

The 1/4" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 100 feet to up to 600 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 10'-300' Length

This 3/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 50'-300' Length

The 3/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 50 feet to up to 300 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

1/4” Home Pro Line, Wire Fishing Rod Kit – 4’ (12’ Total)

The Home Pro Line Wire Fishing Rod Kit includes 12 total feet of heavy duty rods for tough pulls. They are built to last, with zinc plating and rustproofing. The ends are made of machined steel. These wire fishing rods are stiff enough for drop ceilings and flexible enough for working with insulated walls.

3/16" Fiberfish II Wire Fishing Rod, 6' Length, Bullnose Ends

The versatile, non-conductive Fiberfish II is perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Wire Fishing Rod Kit, 6' Rods (30' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Wire Fishing Rod Kit, 3' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. Kit comes packaged in a handy, clear carrying case with vinyl caps.

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

3/16" Fiberfish II Kit, Plastic Coated Rods - 6' (30' Total Length)

The most versatile of the Fiberfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. Fiberfish rods have a durable plastic coating that offers great performance with out the risk of splintering or slivering of the fiberglass.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Male/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod - 6' Bullnose/Bullnose

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. The Glowfish luminous installation rod is durable with zinc plating and rustproof, with machined steel end fittings. It is flexible enough for working inside insulated walls yet stiff enough.

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Bullnose/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

1/4" Fiberfish Wire Fishing Rod Kit, 3' Male/Female, Female/Female, Bullnose Tips (6' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

24" Flex-Fish Flexible Wire Fishing Tool

Use the magnetic retriever to fish wires in uninsulated walls. One end has a permanently attached magnet, the other end has a female fitting which will accept the magnet head, Pull Ring, Fish Hook, Screw Tip, Ball Chain, Wisp Head, and Directional Tool attachments.

3/16" Fiberfish "FourPack" Wire Fishing Rods, 3" (12" Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. This kit comes packaged in a handy vinyl pouch.

1/4" Fiberfish Wire Fishing Rod Cable Tray Kit, 6" (48" Total)

The most versatile of the Fiberfish with the new plastic coating process. These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

1/4" Fiberfish Wire Fishing Rod Kit, 6' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

Have Questions about BES or would like to place an order?

If you have further questions about any BES products or would like to place and order with us please leave us a message using the form below. Someone from our team will respond to your message as soon as possible. We look forward to fulfilling your requests.

Helping you get Wire from Point A to Point B - WIRE INSTALLATION TOOLS & SPECIALTY DRILL BITS

Tools & Accessories

Cable Fishing Rods

Replacement Flexible Leader for Wire Python

This is a replacement flexible leader for the Wire Python wire pulling and retrieval system. Use this leader with the magnet bullet (MAG-301) on the end and keep on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

5/16" Fibersnake Flexible Leader

The 5/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit.

Fibersnake Flexible Leader, for 1/4" and 3/16" Fibersnakes

The 1/4" & 3/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit. It also works well with corrugated conduit.