Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Image is for illustrative purposes only and does not indicate the actual strand count or design of the cable in this listing.
For volume quotes or to inquire about our custom fiber cable options such as terminated ends, pulleyes, and custom cut lengths, please call ##STOREPHONE## or email us at ##STOREEMAIL##
Bulk Fiber, 108 Strand, Bend Tolerant Multimode, 50/125 OM3 10 Gig, High-density Cable, OFNP Plenum Rated, Indoor, 250™m, Aqua Outer Jacket, Price Per Foot
These high density plenum fiber cables are made to use where space is a premium and a small size, lightweight cable with a very tight bend radius is required. Specifically designed for 40GbE and 100GbE applications, each subcable contains up to 12 fibers so the high-density fiber optic cable can be easily ribbonized for MTP connectors or other MTO-style connectors. The small diameter not only saves space and increases the capacity of fiber cables used in tray systems, it also increases cooling power efficiency for under raised floor cabling systems in data centers.
- Ideal for use in trunk, LAN, data center, 40/100GbE and other high-density applications where small size, lightweight, and very small bend radii are required.
- Inventory one cable type to cover the complete range of legacy ST, SC, FC, LC, and advanced MPO-style connectivity
- Installations in ducts, plenums, risers, and air-handling spaces
- Space-saving applications where MTP can be directly terminated to the subcables
- Small diameter, which saves space and greatly increases capacity in tray systems, improves cable management and increases cooling power efficiency and cost for under raised floor cabling systems in data centers
- Smaller and lighter than conventional subgrouped cable
- Ideal for installation in areas with limited space or tight bends
- Easily ribbonized for use with MPO-style connectors
- 8 to 144-fiber premises applications
- UL Listed in accordance with NEC section 770.179(a)
- Superior bend performance with negligible dB loss at very small bend radii
- Standard with bend-tolerant fiber: OM3 and OM4 50™m fiber or ITU-T G.657.A1 single mode fiber
Macro-Bend Performance of Subunits or Individual Fibers
- Cable macro-bend performance comparable to competing bend-insensitive rated fibers.
- High density bend-tolerant cables have extremely tight macro-bend performance.
- High density bend-tolerant OM3/OM4 cables have the best multimode macro-bend performance available.
Rated Macro-Bend Loss HD Bend-Tolerant Single Mode (SLA) Fiber
No. of Turns
Laser Ultra-Fox Fiber Performance
(300 meter 10-GbE)
(300 meter 10-GbE)
(550 meter 10-GbE)
(550 meter 10-GbE)
Low Water Peak
- * Minimum Laser Effective Modal Bandwidth (EMB)
- ** For backward compatibility to LED-based systems, overfilled launch (OFL)
- ^ 1310 nm CWDM lasers (10GBASE-LX4)
- 1 Reach assuming 3.0 dB maximum cabled attenuation at 850 nm and 1.3 dB total connection and splice loss
- 2 Supports 220-meter 10GBASE-LRM distance, or 300-meter 10GBASE-LRM distance with 300-meter capable equipment
- 3 3.5/1.5 dB/km maximum attenuation applies for DX-Series cables greater than 36 fibers, and for all DX-Series cables with armor (corrugated steel tape or interlocked armor) or any other secondary jacketing
- 4 10 km for 1310 nm 1000BASE-LH, and 5 km for 1310 nm 1000BASE-LX
- 5 10 km for 1310 nm 10GBASE-LR, and 40 km for 1550 nm 10GBASE-ER
- 6 Typical Mode Field Diameter at 1310 nm
Multimode Fiber Information
Multi-Mode cable commonly has a diameter in the 50-to-100 micron range (typical multimode fiber core diameters are 50 or 62.5 micrometers). Multimode fiber gives you high bandwidth at high speeds (10 to 100MBS - Gigabit to 275m to 2km) over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. However, in long cable runs (greater than 3000 feet [914.4 meters), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission so designers now call for single mode fiber in new applications using Gigabit and beyond.