Simplex Cable, Corning Glass, Single Mode, 9/125, OFNR Riser Rated, Indoor Only, Tight Buffer, 2.0mm Yellow Outer Jacket
Riser simplex fiber cable is composed of a tight buffer, aramid yarn, and a PVC outer jacket. All component materials meet the EU RoHS and REACH Directive standards.
These riser simplex fiber cables are available in 12 TIA standard colors or special order colors. The fiber cable is UL Listed OFNR for use in vertical runs in building riser shafts or from floor to floor. Standard surface print denotes construction, NEC rating, and fiber type, and includes footage markers. Custom print can also be accommodated.
- 3mm, 2mm, 1.8mm & 1.6mm OD sizes to meet all patch cord applications.
- Consistent 3.5lbs - 5lbs pull force for easy stripability.
- Available in custom colors.
- Patch cord production.
- Data centers.
- Indoor point to point connections.
-40°C to +70°C
-20°C to +70°C
Outer Jacket Material
Flame Retardant PVC
Outer Jacket Color
Tight Buffer Material
Flame Retardant PVC
Tight Buffer Color
Nominal Outer Diameter
Minimum Bend Radius
5 mm/10 mm
Minimum Bend Radius, 1 Turn/100Turns
32 mm/50 mm
Bandwidth (EMB) (High Performance)
Link Length (10GB/s)
Single Mode Fiber Information
Single mode fiber cable (Synonyms mono-mode optical fiber, single-mode fiber, single-mode optical waveguide, uni-mode fiber) is a single strand of glass fiber with a diameter of 8.3 to 10 microns that has one mode of transmission. Single mode fiber has a relatively narrow diameter, through which only one mode will propagate typically 1310 or 1550nm wavelengths. Single mode fibers carry higher bandwidth than multimode fiber, but require a light source with a narrow spectral width. Single-mode fiber gives you a higher transmission rate and up to 50 times more distance than multimode. The small core and single light-wave virtually eliminate any distortion that could result from overlapping light pulses, providing the least signal attenuation and the highest transmission speeds of any fiber cable type.