Made in the USA UL Compliant RoHS Compliant

For volume quotes or to inquire about our custom fiber cable options such as terminated ends, pulleyes, and custom cut lengths, please call 951-801-5780 or email us at

Availability: Call for Pricing

Why can't I add this to my cart?

notify me
Item #: FB19-5482-S72P
Price: CALL

    Bulk Fiber, 72 Strand Corning Glass, Single Mode, 9/125, Micro-Distribution Cable, 6 Sub-units with 12 Strands Each, OFNP Plenum Rated, Indoor Only, Bare Fiber, Yellow Outer Jacket, Price Per Foot

    These 2-96 strand plenum micro distribution fiber cables are composed of single tube or two to eight sub units, an optional central member, aramid yarn, an aramid ripcord, and a PVC outer jacket. Each sub-unit consists of up to 12 colored glass fibers surrounded by aramid yarn with a PVC jacket 2.95mm in diameter. All component materials meet the EU RoHS and REACH Directive standards. Sub-units can be color-coded or sequentially numbered upon request.

    Plenum micro-distribution fiber cable is available in 12 TIA standard colors or special order colors. The fiber cable is UL Listed OFNP for use in ducts, plenums and air-handling spaces. Standard surface print denotes construction, NEC rating, and fiber type, and includes footage markers. Custom print can also be accommodated.


    • 250µm colored bare fibers.
    • Smaller outer diameter for tight spaces.
    • NFPA262 Compliant.
    • Exclusive use of Corning® optical fibers.
    • Meets the application requirement of national Electric Code (NEC) Article 770 and is OFNP rated.


    • Data centers.
    • Ready for MTP connectors.
    • High density installations.
    • Ready to ribbonize.
    Micro-Distribution Corning Fiber 72 Strand Single Mode Plenum

    *Image shown above is a 72 fiber cable.

    Temperature Range

    Storage Temperature
    -40°C to +70°C
    Operating Temperature
    0°C to +70°C

    Cable Characteristics

    Fiber Count
    Outer Jacket Material
    Flame Retardant PVC
    Sub Unit Material
    Flame Retardant PVC
    Strength Member
    Aramid Yarn
    Central Strength Member
    Fiber Reinforced Plastic Rod
    Coating on Central Strength Member
    Flame Retardant PVC

    Physical Characteristics

    Nominal Outer Diameter
    10.5 mm
    252 lbs/km
    Minimum Bend Radius, Installation
    15.75 cm
    Minimum Bend Radius, Operation
    10.5 cm

    Optical Characteristics

    Core Size
    9 µm
    (1310/1550) nm
    Max. Attenuation
    (0.5/0.4) dB/km
    Bandwidth (EMB) (High Performance)
    Link Length (10GB/s)

    Single Mode Fiber Information

    Single mode fiber cable (Synonyms mono-mode optical fiber, single-mode fiber, single-mode optical waveguide, uni-mode fiber) is a single strand of glass fiber with a diameter of 8.3 to 10 microns that has one mode of transmission. Single mode fiber has a relatively narrow diameter, through which only one mode will propagate typically 1310 or 1550nm wavelengths. Single mode fibers carry higher bandwidth than multimode fiber, but require a light source with a narrow spectral width. Single-mode fiber gives you a higher transmission rate and up to 50 times more distance than multimode. The small core and single light-wave virtually eliminate any distortion that could result from overlapping light pulses, providing the least signal attenuation and the highest transmission speeds of any fiber cable type.