Tight-Buffered Distribution Fiber Cable

Tight-Buffered Distribution Fiber Cable - The Multifaceted Cable

Fiber-optic cable transfers information at a much faster rate than copper cable through the use of light as opposed to electricity; therefore, the extensive desire to predominantly utilize fiber cable as a mode of transmission has become quite evident. To broaden the appeal of this technological product, fiber cable can be installed virtually anywhere. In order to exemplify this point further, tight-buffered distribution fiber, which is perhaps the most widely used fiber cable for numerous reasons, will serve as the main focus and means of demonstration.

A Brief Overview

Tight-buffered distribution fiber cable is suitable for both indoor and outdoor use. However, when tight buffered cable is employed in places spanning beyond walls, i.e. places where water, excessive moisture, and/or drastic fluctuations of temperature are present, protecting the cable with an armored layer will be quintessential in order to guarantee optimization of the product.

Being compromised of either 2 to 72 fibers, this type of cable can be equipped with a plenum (level 4) or riser (level 3) flame resistance rating or manufactured as a general-purpose cable (level 2) or residential (level 1). Depending on the area in which the cable will be placed, the cable should abide by the required standard put into place by the National Electric Code (NEC).

Length should be highly considered as well because tight-buffered distribution fiber cable comes in single-mode 9/125, which has a smaller diameter and is commonly used for long distances, and multimode OM1 62.5/125, OM3 50/125, and OM4 50/125, which generally have a larger diameter and are used for shorter distances.


Upon the installation of fiber cable, there may be the need for termination and splicing; conversely, through the use of tight-buffered distribution cable, that burden is no longer an issue as a result of connectors. There are four basic types of connectors: Flat PC, PC, UPC, and APC. These connectors are manufactured for and specific to certain types of fiber cable. Through the use of connectors, the cable should inherently remain unfailing for an extended period of time. Furthermore, a portion of the tight buffered distribution fiber cable can remain dark and then applied in the future with the addition of a connector.

 Fiber Cables. Connectors. Flat PC. PC. UPC. APC.

To End With

Tight-buffered distribution fiber cable has the power to enhance any workspace where quickly and efficiently transmitting information is vital. With indoor and outdoor installation as a viable and worthwhile possibly, along with numerous notable features previously mentioned above, tight-buffered distribution fiber cable could very well be the means of achieving the exceedingly sought-after goal of high-speed cable connection, all provided by Fiber Savvy.

Leave a comment

All comments are moderated before being published