Description
Network Cable Tester for Your RJ45 Connectors
This tester is a small hand-held cable tester that quickly and easily verify the integrity of Ethernet Twisted Pair Cables. It tests Unshielded Twisted Pair (UTP) and Shielded Twisted Pair (STP) cables. The Network Cable Tester checks for continuity and configuration of the wiring with RJ45 connector. It checks for open circuits, shorts, misfires, reversals, and split pairs. The debug mode quickly identifies which cable pairs have a specific wiring fault. Also, the main unit and remote unit allow one person to test T568A, T568B, 10Base-T, and Token Ring.
Features
Features
- Tests UTP and STP cable
- Checks continuity and configuration of wiring RJ45 plugs
- Tests for open circuits, shorts, miswires, reversals, and split pairs
- SHIELD detection tests and a cable's shield integrity
- Debug mode quickly identifies which cable pairs have a specific wiring fault
- Main unit and remote unit allow one person to test T568A, T568B, 10-Base-T, and Token Ring
- Powered by 4 LR44 button cells (Included)
Specifications
| TECHNICAL SPECIFICATIONS | |
|---|---|
 |
|
| SIZE | 106×28×25mm (in storage state) |
| CABLE LENGTH | Minimum: 1m Maximum: 300m |
| BATTERY | 1.5V button cell, LR44 or equivalent, 4 pieces |
| WEIGHT | about 52g (including battery) |
| FAULT LOCATION | It can test Cable for open circuit, short circuit, right or wrong, reverse connection, and series wound or not. |
| TYPES | Test the cable of the T568A, T568B, Token Ring, and 10Base-T and so on. |
What's In The Box
What's In The Box
- Qty 1 - Network Cable Tester
- Qty 4 - LR44 Button Cells Batteries
- Qty 1 - Manual
